|
LCD screen
LCD Display showing voltage, current charge, mAh and time individually
You have four
functions to choose from :
Charge
Insert the battery. Select the charge current of your choice by pressing the “CURRENT”
button (from 200 up to 1800 mA). When the batteries are fully charged the display
shows “Full”
Discharge
Discharge mode discharges your batteries before charging in order to avoid what
is known as 'memory effect', especially useful for older NiCd cells.
Test function
In order to measure the useful working capacity of each rechargeable battery
under certain discharge conditions (from 100 to 500 mA), charge the
battery until it is full and then discharge until it is empty and
charge it again. The capacity in mAh is simultaneously displayed.
This way, bad or low capacity batteries can be sorted out and
replaced.
Refresh
In Refresh mode batteries will be continuously charged and discharged with a user
selectable current and the capacity is monitored until no further
increase in capacity is noted. By this way you can often reactivate old
NiCad or NiMH batteries.
|
